Polyester body filler Putty Base water basedfor galvanized steel / aluminum surface

Product Type

Purpose

Mainly on the substrate pits, needle shrinkage, cracks and weld defects such as small filled and

modified to meet the flat front surface of the substrate finish, smooth.

Substrate

1. Can be applied to steel, galvanized steel, aluminum surface to two-component polyester putt. 

2. Small scratches can be filled pit on the other plastic pieces to fill the position of the first plastic

spray primer.

Mixing Ratio

100:2 (product density than 1L: 1.85KG)

Notice

1 For lower viscosity putty, manufacturers need to buy matching putty resin to be adjusted.

2 After immediately stamped, used putty into the original container is prohibited.

3 Putty is a dangerous chemical hardener, putty shall be stored in a cool place, away from heat, avoid the sun, avoid backlog collision.

4 in the use, storage and transportation process, should comply with the relevant safety regulations, to avoid skin and eye contact with the product or inhalation of its vapor, the best to wear protective glovesand safety eyepiece.

5 General putty from the date of production, effective storage of twelve months.

Shelf Life

12months if stored in its original sealed cans at 20

Packing

3.2kg , 3.7kg or 20kg  can